Yaesu FT-7900e *DISCONTINUED

FEATURES, FUNCTIONS AND SPECIFICATIONS:
◾ The FT-7900E provides 50 Watts of power on the 144 MHz band, and 40 Watts on the 430 MHz, and is designed for simplicity of operation along with high performance in the receiver section.
The FT-7900E is ideal for the active Ham who has a need for simplex, repeater, or FM satellite operation on both bands, but without the complication of cross-band repeat capability, which is available on our FT-8800E and FT-8900E models.

◾ High Power Output.
Boasting a big 50 Watts of power output on 144 MHz, and 40 Watts on 430 MHz, the FT-7900E also includes provision for three lower power levels, so you never have to use more power than you really need. The power level is stored in regular and Hyper Memory registers, too.

◾ Wide Receiver Frequency Coverage.
The FT-7900E provides receiver coverage from 108 to 520 MHz, and 700 to 999.99 MHz (cellular blocked), so you have available a wide range of monitoring excitement, including AM Aircraft, Public Safety, Government, Business, and, of course, Amateur communications. The synthesizer steps appropriate for the operating band are automatically selected, too!

◾ Large LCD Display.
The large backlit LCD on the FT-7900E ensure excellent visibility.

◾ One-Touch.
Five front panel keys allow complete transceiver configuration status to be stored for convenient one-touch recall. So you can set up favorite frequencies in each operating band, including the receive-only bands, and then recall them with a single touch of a button!

◾ Over 1000 Memory Channels.
The FT-7900E’s incredible memory channel capacity includes registers for over 1000 channels, each capable of storing a 6-character Alpha-Numeric label. And the memories may be stored in any of the 20 available memory groups; a particular memory channel may also be stored in multiple groups, if desired..

◾ YSK-7800 Remote Mounting Kit (option).
Using the optional YSK-7800 Separation Kit, which contains both cabling and a bracket for the remote front panel, you can mount the FT-7900E’s front panel on the vehicle’s dash board, then stow the radio’s body under the seat or in some other convenient, out-of-the-way location. The cables are approximately 20 feet (6 m) in length.

◾ WiRES™ Internet Linking Capability.
The FT-7900E’s DTMF signaling capability includes provision for easy access to Yaesu’s WiRES™ (Wide-coverage Internet Repeater Enhancement System) Internet linking nodes, as well as other linking systems that require a DTMF string for access.

◾ Note: Specifications are subject to change without notice, and are guaranteed within the 144 and 430 MHz Amateur Bands only. Frequency ranges will vary according to transceiver version; check with your dealer.

GENERAL:
◾ Frequency Range:
....RX: 108.000 - 520.000 MHz, 700.000 - 999.990 MHz.
....TX: 144.000 - 146.000 MHz, 430.000 - 440 000 MHz.
◾ Channel Steps: 5/10/12.5/15/20/25/50/100 kHz.
◾ Modes of Emission: F2A, F2D, F3E.
◾ Antenna Impedance: 50Ω, unbalanced (Antenna Duplexer Built-in).
◾ Frequency Stability: ±5ppm @ -10ºC to +60ºC.
◾ Operating Temperature: Range -20ºC to +60ºC.
◾ Supply Voltage: 13.8 VDC (±15%), Negative Ground.
◾ Current Consumption (approx):
....RX: 0.5A (Squelched).
....TX: 8.5A (144 MHz, 50W), 9.0A (430MHz, 45W).
◾ Case Size: (W x H x D, mm) 140 x 41.5 x 168 (w/o knobs & connectors).
◾ Weight: (approx.) 1 kg.

TRANSMITTER:
◾ Output Power: 5/10/20/50 W (144 MHz), 5/10/20/45 W (430 MHz).
◾ Modulation Type: Variable Reactance.
◾ Maximum Deviation: ±5 kHz, ±2.5 kHz.
◾ Spurious Radiation: At least -60dB below.
◾ Microphone Impedance: 2 kΩ.
◾ DATA Jack Impedance: 10 kΩ.

RECEIVER:
◾ Circuit Type: Double-conversion Superheterodyne.
◾ Intermediate Frequencies: 45.05 MHz / 450 kHz.
◾ Sensitivity: 0.2µV for 12dB SINAD (137 - 150 MHz, FM).
◾ (see data sheet for other readings) 0.2µV for 12dB SINAD (420 - 520 MHz, FM).
◾ Squelch Sensitivity: Better than 0.16µV.
◾ Selectivity (-6dB / -60db) 12kHz / 30kHz.
◾ Maximum AF Output 2W @ 8Ω for 10% THD.
◾ AF Output Impedance 4 - 16 Ω

PACKING INCLUDES:
1 Pc of FT-7900 Transceiver.
1 Pc of MH-48A6J DTMF Microphone.
1 Pc of MMB-36 Mobile Mounting Bracket.
1 Pc of DC Power Cord with Fuse.
1 Pc of Spare Fuse (32V 15A).
1 Pc of User Manual in English/German.

AVAILABLE ACCESSORIES:
◾ ADMS-2K = Programming Software.
◾ CT-39 = Packet Cable.
◾ MEK-2 = Microphone Extension Kit.
◾ MH-42B6JS = Hand Microphone with 1750 Hz Burst Button.
◾ MLS-100 = External Speaker.
◾ MMB-60 = Bracket.
◾ YSK-7800 = Remote mounting Kit.

AVAILABLE SPARE PARTS:

LINK(S) TO VIDEO OF THIS PRODUCT:
Links to video’s to be published as soon as possible.
Feel free to send link suggestions.

ADDITIONAL SEARCH OPTIONS:
FT-7900, FT 7900, FT7900, FT-7900E, FT 7900E, FT7900 E, FT-7900R/E, FT 7900 R/E, FT7900 R/E.

BARCODE:
490995143900

This product was added to our website (or changed) on Tuesday 25 August 2015.

For quantity pricing please contact our sales desk.

Although the information and specifications at this internet site are presented in good faith and believed to be correct, Avera B.V. makes no representations or warranties as to the completeness or accuracy of the information.

BELOW IN RED IS A LINK TO SERVICEDOCS.COM
Click the link for more detailed information on this product.